How To Fix HP Printer 0xc18a0206 Error

Solution

 Fixing error code oxc18a0206 on HP printers 

This error appears on these printers: C7180, C7280, C5180, C6150, Photosmart 3310, etc...

• Press * and # at the same time
• Press 1, 2, 3 and “support R0632M” should display
• Press > and “information menu” should display
• Press > and “configuration menu” should display
• Press OK and “hardware failure status” should display
• Press OK “failure status: clear”. Press OK to clear
• Press CANCEL
• Press CANCEL
• Press CANCEL
• Turn printer off, unplug power cord for 2 minutes, plug cord back in then turn printer back on.

Solution

 Reset the product 

• Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE: The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon (). If your printer has a network or wireless connection, ignore this step.

Example USB connection (your product might not look exactly the same as this example)

• Remove the cartridges from the product.
• Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE: If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

• Disconnect the power cord from the back of the product.
• Wait 60 seconds.
• Reconnect the power cord.
  If the product does not automatically turn on, press the Power button ().
• Reinsert the cartridges, and then close any open doors on the product.
• If you receive a prompt to print a calibration page, do so.
• If you disconnected the USB cable, reconnect it to the rear of the product.
• Try printing again.

Fix Laptop Screen Vertical Lines

Solution

 Fix Vertical Lines on the Computer Screen 

A number of issues cause vertical lines on your computer screen,
ranging from software incompatibilities with the computer's drivers to hardware problems involving the magnetic field of the monitor.



Errors like:
"my screen has vertical lines causing the screen to look 3D without 3D glasses"

There are two general solutions for fixing the problem:

• Updating your video card drivers to the latest revision.
• Check field of the monitor

Step 1
Run Driver Easy on the computer to make sure the graphics card drivers are up-to-date. Old graphics drivers may not have the proper configuration to support the monitor, which may be remedied in the update.

Step 2
Right-click on the desktop, choose the "Screen Resolution" option, set the resolution drop menu to the setting that has the "(Recommended)" text next to it and click "OK."

Step 3
Disconnect both ends of the cable connecting the monitor to the computer.

Step 4
Straighten any bent pins you find in the connection cable. If any pins are missing or damaged the cable should be replaced.

Step 5
Check for any wear or bends on the cable. The cable might look fine on the outside, but the internal wiring could be damaged. Straighten the cable by pulling any bent sections apart with your hands.

Step 6
Reconnect the cable to both devices and check to see if the vertical lines are still present.

Step 7
Swap the cable with a second cable of the same connection type and check for the vertical lines. If the lines are gone, the first cable is bad.

Step 8
Connect the computer to another monitor using the second cable. If the monitor still showing the lines there is a problem with the graphics card.
Try using a different video connection port or type if the computer and monitor both support one. If the monitor still shows the line with a different port of the same type, there is likely a problem with the monitor connection.

Step 9
Connect the monitor to another computer using the second cable. If the monitor still shows the vertical lines, there is a problem with the monitor's connection port.

Solution

 How to Fix Vertical Lines on the Computer Screen 

Computer screens, like any component of a computer system, work or fail to work because of a series of possible factors: the input from the computer, the settings on the screen, and the performance of the screen itself. If you are seeing vertical lines on your screen, one of a few things might be happening. Sometimes the fix is simple and straightforward, and other times fixing vertical lines will require some troubleshooting.

Step 1
Power down the computer and unplug all peripherals. If you are using a laptop, take its battery out by flipping it upside down and sliding the battery release latch. Press and hold the power button for 15 or 20 seconds to clear all residual power from the system. Some of the computer’s power might have been transmitting to the monitor, causing it to short out. Reconnect everything and turn the system back on to see if the lines are gone.

Step 2
Unplug the monitor from the back of the computer and wait a few seconds until it displays a message “No signal.” If the no signal message also has vertical lines, you know the problem is in the monitor and not in your computer. Press the “Menu” button on the screen and then use the other buttons to browse for a “Factory Settings” mode. Select this mode to reset the monitor to its original settings. If the lines persist, the monitor may have been dropped or exposed to a magnet -- which can’t be fixed.

Step 3
Reconnect and turn the computer back on. Look for the lines at boot up: if you see lines before Windows loads, the problem is either with the video card, the video connection cable -- whether HDMI or VGA -- or the monitor itself. If the lines only appear in Windows, the problem is a Windows setting -- most likely the refresh rate. Right-click on the Desktop once Windows loads and choose “Screen Resolution.” Click “Advanced Settings,” “Monitor,” and then lower the refresh rate to see if the lines disappear.

Tips
If you recently installed a new program or driver update before the lines appeared, the problem could be caused by the new driver. Use “System Restore” -- a handy Windows application -- to restore the system settings to a date before you noticed the problem.
If you are using a laptop computer, the screen may have been damaged or jostled loose by being banged around, or by routine wear from opening and closing the lid. Try gently bending the corners of the screen to see if the lines change or disappear. If so, the lines are caused by physical strain on the screen. You can try disassembling the screen to remove some stress, though this will void your warranty.

Solution

 How to fix a laptop screen that has lines for free 

My laptop computer screen had vertical static / lines on the lower half. This was my solution.

**********

Solution

 Vertical lines in laptop screen - Free Quick fix 

So i was having issues with vertical lines on my screen. After about half an hour they are now gone. This is easy and free.

**********

Solution

 How to Fix Vertical Lines on Laptop / Television / Computer Screen 

Vertical lines appearing on LCD screen is very common. Whether the screen belongs to a laptop computer or desktop PC, mobile phone, or even a television, the fault is usually due to the ribbon cable and its connections.
A faulty ribbon cable can cause all sorts of havoc manifesting in bright vertical lines. Sometimes they can be coloured lines such as blue, green, grey, black, and red. The lines can appear thick or thin and on just one-half of the screen. Sometimes the fault will manifest as two vertical white lines. You can even get horizontal lines as well.
If you have lines appearing on the LCD screen, then the first simple thing to check is the seating of the ribbon cable that connects the display panel to the motherboard. Most of the time, the fault is with the poor connection made by the ribbon cable.

What causes lines?
One of the most common problems with ribbon cables is oxidation of the contacts. It can happen either on the ribbon cable contacts or on the socket contacts. Manufacturers often use a mix of gold and copper for the electrical contacts, however, if they have not used enough gold, then oxidation occurs over time. This results in a working television or laptop screen suddenly exhibiting lines.
The solution is of course very simple, one needs to clean the contacts with a high quality electrical contact cleaner. It is best to clean the socket and the ribbon cable contacts, which will solve the fault.

Cracked Ribbon Cable

One of the most common faults with laptops is that the ribbon cable connecting to the LCD panel cracks. It typically fails near the hinge area due to flexing in that region, and over time, some of the tracks on the plastic cable breaks. I have seen these types of faults on many laptops. It does not matter whether it is a Lenovo, IBM, Acer, Samsung, Toshiba, or even a MacBook Pro!

Dislodged Cable

It is also possible to have a dislodged cable, which typically occurs on mishandled laptops. The plastic clip that holds the ribbon cable is very small and delicate and if the laptop receives an impact, the ribbon cable can dislodge.
This type of fault can also occur on LCD televisions; however, it tends to be on new units, where the box has received an impact during transit from the factory.
In this situation, the repair can be easy, as the cable will simply require reseating. However, there is still the labour time to consider as it can take the best part of the day to gain access to the ribbon cable.

Troubleshooting
If the laptop has a socket that provides a VGA output, then the first thing to do is to hook up another good monitor to it to see if the picture is good. If the picture on another monitor is good, then you can be sure that the video chipset and the motherboard electronics are operating properly, and it is a connection issue.
I used this same method of troubleshooting to repair an LCD television recently. Modern televisions have a video out socket, and if you feed the signal from that to another monitor, you can check for the quality of the video display. If the external monitor does not show lines, then you know for sure that it is a connection issue. Hence, this method of troubleshooting works for some of the modern televisions as well.

Repairing a Laptop

When half of the vertical interlace is missing showing a picture that is broken up vertically, the display appears with vertical lines. This is usually due to a cracked ribbon cable.
Generally, for laptops a replacement cable is always required due to it breaking near the hinge. I had this Dell laptop and replacing the LCD ribbon cable solved the problem. I managed to buy a replacement from Dell for a modest price £6.00. The laptop was just outside the warranty period; however, they still shipped out the cable free of charge. This is the reason why people buy Dell. In my experience Dell tend to stand by their customers and products, and their prices for replacement parts are realistic and down to earth.
Replacing a laptop ribbon cable is simple, and the top-half of the laptop, and keyboard needs removing to gain access to the socket on the motherboard side. As you can see, it flexes near the hinge area and breaks where the ribbon cable wraps around the hinge.

Fix Computer Restart Loop

Solution

 How To Fix Windows 7 Restart Loop Problem 

In the meantime, if you’ve already installed the Windows 7 KB3033929 update and are now stuck in that endless restart loop there are ways to get out of it. While some users have reported that after a couple of days the loops did stop for those still experiencing problems, there are a couple options available for fixing the restart loop.



 Use System Repair/Restore Options 1. Restart Computer
2. As soon as screen powers on, Press F8 continuously until you get to the “Advanced Boot Options” screen
3. Use the arrows keys to select “Repair your computer,” then press Enter.

To begin repairing the Windows 7 update reboot problem, restart your computer and press F8 continuously to enter Advanced Start Options and select "Repair Your Computer." Microsoft 

4. A popup screen should appear. Select “Use Recovery Tools That Can Help Fix Problems Starting Windows,” then click next.

Select “Use Recovery Tools That Can Help Fix Problems Starting Windows,” then click "Next," to proceed to recovery options Microsoft

5. A new popup screen appears. Here select “System Restore.” There you can choose from different recovery points to help return your system to normal.
6. Once your system has been recovered, you will want to go into your update files, and select all but the MS Update 3033929 so that the problem doesn’t occur again.

Solution

 Computer stuck on restart loop 

Mesage displayed "preparing to configure windows. Do not restart your computer" before rebooting
This issue could occur if the updates are not installed or configured properly.
What is the exact blue screen error message?
Do you recall which were the updates that were recently installed on your computer after which this issue triggered?

Unplug all your removable media from the computer, such as removable disks (Blu-ray disks, DVDs, CDs), memory cards (CompactFlash card, Secure Digital card, Memory Stick), and USB flash drives. These removable media may cause this issue during the restart of Windows.

As you have mentioned that your computer is in restart loop, I would suggest you to disable automatic restart and check if you get any error message. Refer to the following link:
Starts Windows in an advanced troubleshooting mode intended for IT professionals and system administrators.
Disable automatic restart on system failure
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7

As you have already perform startup repair, I would suggest you to follow a few more steps mentioned below:
Step 1: Please check if you are able boot your computer in Safe mode. If you are able to boot then please go ahead and un-install the updates which were installed recently after which came across this issue. Refer to the following link to boot your computer in Safe mode:
Start your computer in safe mode
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7

If able to boot, un-install the update that were installed recently. Refer to the following link:
Remove an update
http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-7

Step 2: Once you remove the update, try to boot the computer in normal mode and check. If able to boot the computer, I would suggest you to try to install the pending updates in clean boot and check. A clean boot helps eliminate software conflicts. Here is the link for your reference to perform clean boot.
http://support.microsoft.com/kb/929135
Note: Please go through the section: How to reset the computer to start as usual after troubleshooting with clean boot of the KB article to boot the computer in normal startup after fixing the issue.

Solution

 Endless repair computer loop 

Easy Recovery Essentials is guaranteed to fix the “endless repair computer loop” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.
1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
2. Burn the image with ActiveISO.
3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
4. Once EasyRE is running, choose the “Automated Repair” option and click "continue".

Choose “Automated Repair” in Easy Recovery Essentials

5. After EasyRE scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the "Automated Repair" button to begin.

Choose the drive associated with the Windows installation you’re trying to repair.

6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE’s repair is fully automated:

Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

7. Once the process is complete, EasyRE will report its findings. Click on the "Restart" button to reboot your PC and test the changes.
8. The “endless repair computer loop” error should now be fixed as your PC begins to load:

 Windows, booting up successfully.

You can download Easy Recovery Essentials from here.

**********

Solution

 Windows Vista and 7 Update Reboot Loop Fix 

Symptom: You have an update that is causing Windows Vista or Windows 7 to get stuck in an infinite reboot loop. The problem usually manifests as a "Stage 3 of 3: 0% complete..." followed by a reboot which boots to the same exact message, not allowing you to get to your account login or desktop at all. It's a pain and it doesn't stop, even in Safe Mode or trying Last Known Good Configuration at the advanced boot menu.

Here's the short version for people who know how to get to the tools to do this and if running System Restore from the install DVD fails to work: DELETE the files \Windows\WinSxS\cleanup.xml AND (if present) \Windows\WinSxS\pending.xml and the infinite update reboot loop will be fixed.

There are two ways to get to the files you need to delete. The easiest way is to boot your Windows installation DVD, and at the "Install Now" button, click the link at the bottom-left that says "Repair your computer," open a command prompt, and type:
del C:\Windows\WinSxS\cleanup.xml
del C:\Windows\WinSxS\pending.xml

The other way is to download a live Linux distribution such as the Tritech Service System (which, unlike Vista or 7's DVD, can be booted from a USB flash drive for computers with no CD/DVD drive such as netbooks), open a command prompt, mount the filesystem, and remove the files. Assuming your Windows installation is the first partition on the first hard drive, the following commands in rxvt or in a console in the Tritech Service System should work:
mount.ntfs-3g /dev/sda1 /mnt/sda1
rm /mnt/sda1/Windows/*/cleanup.xml /mnt/sda1/Windows/*/pending.xml
umount /mnt/sda1
reboot -f

Either way you get it done, this solution will stop the update engine's reboot loop and let you get back into your computer. You may have to do some additional fixes or manual updates if you encounter problems, but at least your login screen and/or desktop should be accessible! It's a very annoying problem and I've noticed that Google searches for things like "vista stage 3 of 3 reboot" generally only provide info about how to run System Restore from a Vista DVD. Unfortunately, if there's a problem with an update, sometimes System Restore does not work and fails with obscure errors, so this info is vital.

It may be your last chance to avoid giving up and reinstalling Windows, and we always like avoiding reinstalls!

**********

Solution

 How To Fix A Windows 7 Infinite Reboot Loop 

Booting Into the System Recovery Options Screen
First you will need to boot your computer into the System Recovery Options screen. This is usually done with the installation DVD, which should be inserted into the optical drive. When the computer boots, Press any key to boot from CD or DVD as requested, select your language preference and then click Repair your computer. A list of installed operating systems should be displayed – select Windows 7 and click Next.

The System Recovery Options screen will appear. Select the first option, Use recovery tools that can help fix problems with Windows, and then select Startup Repair.

(If your computer has a pre-installed recovery partition, the process is a little difference. In this case, boot to the Advanced Boot Options screen, select Repair your computer and tap Enter. Next, select the keyboard language type, then your username and password before selecting Startup Repair in the System Recovery Options screen.)

With Startup Repair selected, Windows will attempt to automate the repair; this might work – otherwise, further action will be required.

Preparing Windows 7 Recovery
If the Startup Repair option fails, you will receive a message reading Windows cannot repair this computer automatically. At the bottom of the message, click View advanced options for system recovery and support to return to System Recovery Options, and instead click Command Prompt.

The black command line interface will open with X:\ selected by default; this is the Windows internal RAM disk that is used by System Repair. You will need to navigate to your Windows system drive, which will by default be on the C: drive.

To open this, type C: and press Enter. Type DIR and press Enter to check that you are in the right drive – the contents listed should include the Program Files, Users and Windows folders.

You will then need to change directory. Enter CD \windows\system32\config and then DIR to check that the correct files and folders are listed:

• RegBack
• DEFAULT
• SAM
• SECURITY
• SOFTWARE
• SYSTEM

With access to the correct directory and the required folders present, enter MD mybackup to create a backup folder. Enter copy *.* mybackup to copy everything to this location, agreeing to the overwrite warnings when they appear.

The RegBack folder stores automatic Windows registry backups. To check if these can be used in restoring your system, enter CD RegBack and then DIR to view the contents. In the folder, you should have the following:

• DEFAULT, SAM and SECURITY files, each around 262,000 bytes
• SOFTWARE file, around 26,000,000 bytes
• SYSTEM file, around 9,900,000 bytes

Note that these figures are approximate, but recognise that if any of these files display a size of zero bytes then you will have to resort to another method of restoring Windows 7.

Running the Windows 7 Recovery
With your RegBack folder containing the data you need to restore Windows 7 and rescue it from the reboot loop, you will be able to copy the contents and use them to get the operating system back up and running again.

Begin by entering copy *.* .. – note the two trailing dots. These indicate that the contents should be pasted to the level above – the Config folder. Agree to all prompts concerning whether you want to overwrite files, and once the process has completed enter exit to close the command prompt.

On the System Recovery Options screen, click Restart to reboot your PC – if everything has gone as it should, Windows 7 should now start correctly!

Install Windows 7 or 8 From USB

Requirements:

USB Flash Drive (Minimum 4GB)
Windows 7 or Windows 8 installation files.

To install the Windows USB/DVD Download Tool:

1. Click to open the Windows USB/DVD Download Tool page. Download then Run.
2. Follow the steps in the setup dialogs. You'll have the option to specify where to install the Windows USB/DVD Download Tool.

You must be an administrator on the computer on which you are installing the Windows USB/DVD Download tool. It requires the Microsoft .NET Framework version 2.0 or higher.

To make a copy of your Windows ISO file:

1. Click the Windows START button, and click WINDOWS USB/DVD DOWNLOAD TOOL in the ALL PROGRAMS list to open the Windows USB/DVD Download Tool.

2. In the SOURCE FILE box, type the name and path of your Windows ISO file, or click BROWSE and select the file from the OPEN dialog box. Click NEXT.

3. Select USB DEVICE to create a copy on a USB flash drive or select DVD disk to create a copy on a DVD disk. 

4. If you are copying the file to a USB flash drive, select your USB device in the drop-down list and click BEGIN COPYING. If you are copying the file up to a DVD, click BEGIN BURNING.

When your Windows ISO file is copied to your drive, install Windows by moving to the root folder of your DVD or USB drive, and then double-click Setup.exe.

Always works with : Lenovo, Dell, Asus, Acer, Samsung, Toshiba, HP

Change All Text to Capitals in Excel

If you need to apply uppercase change for some columns or cells:

Use the UPPER function to convert all letters in a text string to uppercase.

   

 WATCH THE TUTORIAL
(Upper Function - Convert text to upper case in Microsoft Excel 2013)

If you need to apply uppercase change for all text in excel sheet:

Copy the text you need to apply changes

Paste the text in Word Office 

  Select the complete text (CTRL + A) 

  Convert the text to uppercase with shortcut (CTRL + Shift + A) 

  Copy Converted text & Do "paste special" in excel

  Check or Choose "text"

                                 

How to Fix 0xc000007b Application Error

Most frequently happens with these games (Windows 7 64bit):

• Assassins Creed IV Black Flag ( AC4BFSP.exe )
• Battlefield 4 ( bf4.exe )
• Call of Duty: Ghosts ( iw6mp64_ship.exe )
• The Elder Scrolls Skyrim ( SkyrimLauncher.exe )
• Diablo 3 ( Diablo III.exe )
• Dirt 3 ( dirt3_game.exe )
• Watch Dogs ( Watch_Dogs.exe )
• Just Cause 2 Multiplayer ( JcmpLauncher.exe )
• Child of Light ( ChildofLight.exe )

This is a very common error that sometimes occurs when trying to run some DirectX games or applications. According to numerous articles all across the internet, it occurs when a 32-bit application is trying to interact with 64-bit system environment. Although Windows XP may sometimes returns a similar error, it most commonly happens in Windows 7 64-bit. There are many solutions to this problem, but none of them is 100% effective. Yet, there are couple of tricks that will solve this trouble in the highest number of cases.
Before trying more complicated methods, there are few simple ways which may help solving 0xc000007b or any other similar error. These are:

Reinstall the application

Uninstall the application which gives you an error and install it again. During installation, pay attention to these:
1. Turn off your antivirus software before starting the installation.
2. Accept any additional software offered during installation process, since it may be crucial for running your application properly. You can skip things such as search bars, antivirus scanners, registry cleaners and the other software which isn’t directly related to the application.
3. Install an application to the system partition (C:). Although this shouldn’t matter, it’s been proven that some apps may return an error if installed on a logical partition.

Run application as administrator

Right click on your application and choose “Run as administrator”. This will give additional privileges to the application and sometimes may help fixing some errors. If this method eliminates the error, you can set your application to always run with an administrator privileges. To do this, choose Properties from right-click menu, select Compatibility tab and check “Run this program as an administrator” option.

Run application in Windows XP compatibility mode

Try running your program in compatibility mode for Windows XP. Although this feature is for programs that were originally designed for Windows XP, it is known that it can also help repairing errors caused by a newer software. Right click on your application and choose Properties from a right-click menu, go to Compatibility tab and select compatibility mode for Windows XP.

Check hard disk for errors

Application errors and problems may also be repaired by performing disk error checking. Simply right-click on the drive where your application is installed and choose Properties. Select Tools tab and click on Check now button. If it is your primary partition that you are trying to check for errors, it will schedule a disc check for the next system reboot. In that case, restart your PC and wait for a disk check procedure to finish.

Replace 32-bit xinput1_3.dll with an appropriate version

0xc000007b error most commonly occurs when xinput1_3.dll file becomes corrupted or overwritten with another version which happens to be incompatible with some games or applications.
This happens a lot, especially with 32-bit version of DirectX games, and usually gets repaired after upgrading or reinstalling DirectX runtime components. But before going through a little bit complicated DirectX reinstallation process, you should try to repair xinput1_3.dll file by replacing it with an appropriate version. This is 100% safe and secure method and it’s proved to be the most effective way of fixing 0xc000007b error.


Follow these steps:

1. Download 32-bit xinput1_3.dll file
2. Extract file using WinRar archiver or 7-Zip
3. Right-click on extracted xinput1_3.dll file and choose Copy
4. Navigate to C:\Windows\SysWOW64 , right click inside the folder and choose Paste. If Copy File dialog prompts, choose Copy and Replace
Note: although it isn’t essential part of OS, you might want to backup your original xinput1_3.dll file and restore it later, if this method doesn’t help you solving 0xc000007b error.

Replace the most frequently used DLL files inside System32 and SysWOW64 directories

If replacing xinput1_3.dll didn’t solve the problem, there is still a bunch of other files which may be causing the 0xc000007b error. Determining which one is the troublemaker may be extremely difficult, especially if more then one file is involved.
So, how about replacing them all together? Keep in mind that these are not essential OS files and replacing them WILL NOT crash your system. The worst case scenario, after you replace these files, is that you will not be able to run some games or applications, but you will be able to boot your system as usual. If that happens, and the error is not fixed, you can easily return your original files to their locations and everything will be back to its previous state.

Complete list of DLL libraries, and their original locations in Windows 7:

C:\Windows\SysWOW64\msvcp100.dll (Microsoft Visual C++ 2010 Redistributable Package runntime library)
C:\Windows\SysWOW64\msvcr100.dll (Microsoft Visual C++ 2010 Redistributable Package runntime library)
C:\Windows\SysWOW64\msvcr100_clr0400.dll (Microsoft C Runtime library)
C:\Windows\SysWOW64\xinput1_3.dll (Microsoft DirectX runntime library)
C:\Windows\System32\mfc100.dll (Microsoft C Runtime library)
C:\Windows\System32\mfc100u.dll (Microsoft C Runtime library)
C:\Windows\System32\msvcp100.dll (Microsoft Visual C++ 2010 Redistributable Package runntime library)
C:\Windows\System32\msvcr100.dll (Microsoft Visual C++ 2010 Redistributable Package runntime library)
C:\Windows\System32\msvcr100_clr0400.dll (Microsoft C Runtime library)
C:\Windows\System32\xinput1_3.dll (Microsoft DirectX runntime library)
You can download a compressed folder containing all files here: DLL Files Commonly Used By Games
Replacing each of these files is pretty much the same procedure as described in Method 1 but it will have to to be done from Safe Mode. As you may assume, some files are being constantly used by Operating System, so we need to release those from their duties and that’s whey we need Safe Mode. If you are note familiar with Windows Safe Mode. Ok, here we go:
1. Restart your system and boot into a Safe Mode (keep hitting F8 just before Windows loading screen starts)
2. Make backup copies of all files from the list above
3. Extract downloaded file and copy all files from System32 folder to C:\Windows\System32\ and all from SysWOW64 to C:\Windows\SysWOW64\
Note: In case you’ve already tried Method 1, you can skip copying Windows\SysWOW64\xinput1_3.dll file.
4. Restart your computer

Reinstall DirectX runtime components

To avoid 0xc000007b error and similar problems, you should always keep your DirectX up to date. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from official Microsoft’s download section http://www.microsoft.com/en-us/download/confirmation.aspx?id=35 .
The problem may occur if your current version is already up to date but some files were corrupted. In that case, installer detects the newest version and skips the installation process. This can be solved by changing a registry key that contains DirectX version number.

Install/repair .NET Framework

As an integral part of many Windows applications, .NET Framework may cause number of errors and problems if it isn’t regularly updated. To make sure you have the latest version visit Microsoft’s official .NET download page and get a web installer. If you already have the latest version, installer will offer you to repair .NET Framework to its original state. If this doesn’t solve the problem, proceed to the next method.

Reinstall all Microsoft Visual C++ runtime packages

Microsoft released a bunch of these packages during the last couple of years and they all play en essential role in running Windows applications. There are 32-bit and 64-bit versions of Visual C++ packages and they are all equally important. If you still experience 0xc000007b error and none of previous methods has helped you, then this may be your last hope before reinstalling the whole Windows OS completely.
Optionally, you can create a system restore point just in case something goes wrong so that you can easily switch back to previous state.
Ok, first of all, you should completely remove all Microsoft Visual C++ packages from your computer. To do this, go to the start menu and enter “Programs And Features” in your search box. Open Programs And Features window and uninstall everything that include “Microsoft Visual C++” in its name. You don’t have to restart your PC until you remove them all.

When your system reboots and none of those packages are there any more, go to the Microsoft’s official download page: Latest Supported Visual C++ Downloads. Download and install all programs from that page one by one. If some of them fail to install, ignore it and install the next one. Restart your PC as menu times as asked during the installations.